Energy inventions oO

[AA™| Energy]

After 2 years ago of my first own pedals, I'm making the new version... "pedals v2" :p
I used the first one from january of 2015 and now it's time for this new model.
I took this proyect from internet but only images like this:
http://archive.cr3ation.co.uk/png/e84a3b...lera04.png

So here I'll post some images
Each pedal is independent and is mounted on a base, I started with the clutch


I used an square pipe (50 x 30 mm)


this piece form a sort of hinge with the one already welded in the pipe


the small hose will be used as a guide


parts with corresponding screws


assembled parts


pedal


each pedal use a spring like this one


this rod center the spring and gives the possibility to adjust its hardness



pedal ready to assemble


and there's the clutch!

I did the same for the throttle


The brake is a bit different (60 x 30 mm)

Hardness increases gradually (like real brakes)


these parts duplicate the rod travel

(a video of the guys who made it first: https://www.youtube.com/watch?v=nXL2FEPPqUk )



Pedals are done, now the base...



Strong as hell

and all parts assembled




These screws are to adjust the position of each pedal side by side

and comparing the old v1 with the new v2... (weight -> v1 +-5 kg, v2 15 kg )




and a short video
https://www.youtube.com/watch?v=Qz5ffsyd...e=youtu.be

Now I need to add the electronic parts. I wanted to use hall sensors but in my small city I can't found, so I guess I'll use potentiometers...

Next week if I add this I'll upload some pics and yes, after it gets finished, some black and yellow paint will be great